Support Question of the Week: Working with a Loop Command using the Aardvark...
Q: I’m interested in trying to loop the same command every 3 minutes with my Aardvark I2C/SPI Host Adapter. Is there a repeat command in the XML script language that I can use? A: Thanks for your...
View ArticleGuten Tag from Total Phase at Embedded World!
This week, the Total Phase sales team packed their bags and traversed across the world to Nuremberg, Germany for Embedded World! Embedded World is held this year from Tuesday, February 26 to Thursday,...
View ArticleSupport Question of the Week: EEPROM and Flash Programming with the Aardvark
Q: I plan on using the Aardvark I2C/SPI Host Adapter with the Flash Center Software to program SPI flash chips and I2C EEPROM chips on my prototype board. Is there built-in support in the Flash Center...
View ArticleSupport Question of the Week: Monitor USB Traffic with Data Center Software
Q: I am interested in sniffing USB traffic on my USB 2.0 device with the Beagle USB 480 Protocol Analyzer. I have a few questions about the capabilities of the Data Center Software that can be used...
View ArticleSupport Question of the Week: Testing Multiple Units Simultaneously with the...
Q: We are ready to use Aardvark Host Adapters (6 units) in order to test our 6 units simultaneously. Does it mean we should use a separate computer (laptop, for instance) for each Aardvark Adapter? Or...
View ArticleSupport Question of the Week: Monitoring Ethernet Frames Using the Beagle USB...
Q: I recently bought a Beagle USB 480 Protocol Analyzer and have started using it with the Data Center Software to monitor the CDC-ECM and CDC-NCM classes on the USB 2.0 link. Now, we would like to...
View ArticleSupport Question of the Week: View the Last I2C Data Transaction with the...
Q: I am using the Beagle I2C/SPI Protocol Analyzer with the Data Center Software to monitor a particular coming across the I2C bus. I would like to monitor the latest Read transactions that occur after...
View ArticleSupport Question of the Week: Erasing Memory from Any Total Phase Product
Q: I’m interested in buying some of your products, but I have a few questions. First, is there any memory in any of your products that would retain information when powered down? If the answer to this...
View ArticleSupport Question of the Week: Transfer Rate and Size for SPI Programming
Q: I recently came across two of your products – the Cheetah SPI Host Adapter and the Aardvark I2C/SPI Host Adapter. I am interested in programming SPI data, but I’m not sure which SPI host adapter I...
View ArticleSupport Question of the Week: Synchronizing Output from a USB 2.0 Analyzer
Q: I’m working on analyzing data on a USB 2.0 bus and I would like to synchronize the USB data with an external device. I was looking on your website and I see that you have three USB protocol...
View ArticleHow to Read and Write to an I2C EEPROM Using the Aardvark adapter and Control...
One of the most popular uses for the Aardvark I2C/SPI Host Adapter is to read and write to an I2C memory device. In this special two-part Support Question of the Week feature, we will focus on how to...
View ArticleHow to Read and Write to an I2C EEPROM Using the Aardvark adapter and Control...
Here is part 2 of our Support Question of the Week feature on how to read and write to an I2C EEPROM with the Aardvark I2C/SPI Host Adapter and Control Center Software! In Part 1, we provided some...
View ArticleProgramming a Single Sector of an SPI Flash Using the Cheetah Adapter and...
The Cheetah SPI Host Adapter is popular for its fast SPI programming capabilities. In this week’s Support Question of the Week, we will feature a two-part series focusing on how to program a single...
View ArticleProgramming a Single Sector of an SPI Flash Using the Cheetah Adapter and...
Here is part 2 of our Support Question of the Week feature on how to program a single sector of an SPI flash device using the Cheetah SPI Host Adapter and Flash Center Software. In Part 1, we provided...
View ArticleWriting and Reading from SPI Flash Using the Cheetah Adapter and Cheetah GUI...
Last week, we featured a two-part blog feature on how to program a single sector of an SPI flash with the Cheetah adapter and the Flash Center Software. This week, we want to demonstrate the...
View ArticleWriting and Reading from SPI Flash Using the Cheetah Adapter and Cheetah GUI...
Here is part 2 of our Support Question of the Week feature on how to write and read an SPI flash device using the Cheetah SPI Host Adapter and the Cheetah GUI Software. In Part 1, we went over the...
View ArticleTotal Phase Sponsors Class at the Design West Conference!
To kick off the Design West Conference this week, Total Phase sponsored a class hosted by Micrium by providing Beagle USB 480 Protocol Analyzers. The class entitled “Essentials of USB Device...
View ArticleLive from Booth 1824 at the 2013 Design West Expo…
Hello from Total Phase! We are eagerly awaiting the start of Day 2 of the Design West Expo in San Jose, CA. Thanks to everybody who dropped by our booth yesterday! Day 1 was exciting as many attendees...
View ArticleSupport Question of the Week: Viewing Timestamps for USB 2.0 Transactions
Q: I’m using a Beagle USB 480 Protocol Analyzer to monitor some USB data from a mouse. When I plug in the device and run a capture, the timestamps don’t always show up in chronological order. Is there...
View ArticleSupport Question of the Week – MDIO
Normally we confine this blog to SPI/I2C/USB and CAN questions, but once in a while we’re asked questions about other protocols. This week, one customer wanted to know about MDIO. Q: Do any of your...
View Article