Clik here to view.
A New Holiday Promo Tradition from Total Phase - Host Adapters, Protocol...
One of my favorite Christmas traditions is reading 'Twas the night before Christmas on Christmas Eve. I look forward to hearing the melodic verses and envisioning the heartwarming story play out in my...
View ArticleClik here to view.
Are there Specifications or Limits when Utilizing Multiple Aardvark I2C/SPI...
Question from the Customer: I am designing a system that will use 12 Aardvark I2C/SPI Host Adapters. Are there any specifications or limits of how many Aardvark adapters to utilize in one system?...
View ArticleClik here to view.
Why Do I See Phantom Transactions When I am Using a 7-Port USB Hub with the...
Question from the Customer: I am using the Beagle USB 480 Protocol Analyzer. Normally I have no problem, but I don’t understand the readings with this setup, which includes a 7-port USB hub as shown...
View ArticleClik here to view.
Using the Beagle USB 5000 v2 SuperSpeed Protocol Analyzer, How Can I Best...
Question from the Customer: I want to capture the behavior of USB 3.0 device using USB-HDD for recording TV programs over periods of time ranging from a few minutes to up to 8 hours. How can I best...
View ArticleClik here to view.
How Can I Use the Aardvark I2C/SPI Host Adapter in Slave Mode with a Master...
Question from the Customer: I’m using the Aardvark I2C/SPI Host Adapter, and am trying to use it in slave mode to send data to an master I2C device under test (DUT). That I2C device cannot be setup as...
View ArticleClik here to view.
What is the Best Tool to Emulate an SPI Slave to Quickly Transfer Data and...
Question from the Customer: I need to run some tests with a new SPI device using a host adapter as an SPI slave to transfer data files to an SPI master. Will you please suggest which Total Phase tools...
View ArticleClik here to view.
What Are My Options for Sending Commands at Specific Intervals with the...
Question from the Customer: I’m using the Cheetah SPI Host Adapter to send command frames at specific intervals. It appears the Cheetah adapter has a scheduler based sleep function in cheetah.dll...
View ArticleClik here to view.
For the Best Signal Performance Between the Aardvark I2C/SPI Host Adapter and...
I am using the Aardvark I2C/SPI Host Adapter and LabVIEW to communicate with an SPI slave device. The Aardvark I2C/SPI Host Adapter User Manual mentions using a pull-up resistor for the Slave Select...
View ArticleClik here to view.
Now You Can Monitor eSPI Messages with the Promira Serial Platform, eSPI...
Total Phase now supports eSPI, a brand-new protocol introduced to replace LPC on motherboard bring up in PCs and servers. With our new eSPI Analysis Application, the Promira Serial Platform can now be...
View ArticleClik here to view.
How Can A Remote Team View and Analyze Captured Data Without a Beagle USB 480...
Question from the Customer: I’m working on a project with teams distributed in several different locations. I would like to share details of a data capture from a Beagle USB 480 Protocol Analyzer, but...
View ArticleClik here to view.
DesignCon 2016 - Another Great Experience
Last week, we finished up 2 busy days at DesignCon 2016 at the Santa Clara Convention Center. DesignCon is a conference primarily for design, verification, and characterization engineers – so it is a...
View ArticleClik here to view.
How do I filter out orphan data from the timeout packages on the USB bus?
Question from the Customer: I am using the latest version of the Total Phase Data Center Software v6.63 and a Beagle USB 480 Power Protocol Analyzer running on Windows 7, 64-bit. There is a lot of...
View ArticleClik here to view.
Can I Use the API Programs that I Wrote for the Aardvark I2C/SPI Host Adapter...
Question from the Customer: I recently upgraded from the Aardvark I2C/SPI Host Adapter to the Promira Serial Platform. To start using the Promira platform as quickly, as possible, I would like to use...
View ArticleClik here to view.
Total Phase is headed to Embedded World 2016!
Total Phase is headed to Embedded World 2016! February 23-25, 2016, Total Phase will participate in the world’s largest trade fair and congress event for embedded system technologies – Embedded World...
View ArticleClik here to view.
Which Total Phase Tools Do You Recommend for Reading and Identifying CAN Bus...
Question from the Customer: We are a small automotive instrument workshop and are looking for software and a hardware interface to both read and identify CAN bus signals. We need to identify the...
View ArticleClik here to view.
See How You Can Easily Program an I2C EEPROM Using the Promira Serial...
Using the Promira Serial Platform with I2C Active Level 1 and/or Active Level 2 Applications, you can easily program I2C EEPROM devices. And you can do so using your choice of software tools to use:...
View ArticleClik here to view.
See How You Can Use the Aardvark I2C/SPI Host Adapter and a DVI DDC Breakout...
Using the Aardvark I2C/SPI Host Adapter with the DVI DDC Breakout Cable, you can quickly and easily read extended display identification data (EDID data) from a DVI monitor EEPROM. This article...
View ArticleClik here to view.
Total Phase at the Embedded World 2016, Nurenburg Germany
Held annually in Nurenburg, Germany, Embedded World 2016 was the largest, most exciting yet. Hundreds of exhibitors displaying their latest embedded technology innovation to thousands of visitors...
View ArticleClik here to view.
Capture & Decode Power Delivery Protocol on Any Platform Using Data Center
Last week we had big news for USB Type-C: we released the first version of Data Center Software supporting capture & decode of the Power Delivery protocol! Along with this, we started shipping our...
View ArticleClik here to view.
How Do I Capture All the USB Data from a Beagle USB 480 Protocol Analyzer,...
Question from the Customer: I’m trying to save all captured data, including the data that is displayed in the lower pane (the ASCII details) to a .csv file. However, my file shows the truncated data as...
View Article