Clik here to view.
Which SPI Host Adapter Works Best to Interface with an MCU Device for High...
Question from the Customer: I am interfacing a TI MCU (TM4C129x series) with the Aardvark SPI/I2C Host Adapter configured to slave mode. The MCU is sending 10 bytes consecutively out its SPI port in a...
View ArticleClik here to view.
Easily Program SPI Flash Devices Using the Promira Serial Platform with Flash...
The Promira™ Serial Platform with the SPI Active - Level 1 Application is the perfect tool to program SPI memory devices. Together, with the Flash Center Software, makes programming EEPROM and SPI...
View ArticleClik here to view.
Can I use the Aardvark I2C/SPI Host Adapter with a Linux Kernel Driver-based...
Question from the Customer: We need to develop a Linux kernel driver (.ko) for an Intel-based system and want to be able to read/write I2C messages. Is this possible, and if so, what devices and...
View ArticleClik here to view.
Easily Program I2C Memory Devices and Provide Low Voltage Level Power to the...
With the Promira Serial Platform and the I2C Active - Level 1 Application, you can easily program I2C memory devices as well as provide signal voltage and power at the desired low voltage level to the...
View ArticleClik here to view.
Which Host Adapter and Software Can I Use to Program SPI Flash Dual Die Parts?
Question from the Customer: I am designing a system that uses a 1Gbit SPI-Flash (Spansion S70FL01GS). This is a dual-die part. We have used the Aardvark I2C/SPI Host Adapter and Flash Center Software...
View ArticleClik here to view.
How to Use the Promira Serial Platform and Queuing to Read, Write and...
Question from the Customer: We have been using the Aardvark I2C/SPI Host Adapter to evaluate and test I2C peripherals. We write data to the slaves, read it back, and then evaluate the data to...
View ArticleClik here to view.
How Can I Accelerate Sending SPI Data with the High Speed Cheetah SPI Host...
Question from the Customer: I am sending 5 bytes of SPI data using the Cheetah SPI Host Adapter, and Cheetah Python API. It takes about 210 ms to send this data, how do I reduce the programming time?...
View ArticleClik here to view.
How to Choose Which Beagle USB Protocol Analyzer is Best for Your USB 2.0 and...
The product, test and validations have been defined, the budget approved and the project is scheduled. The next question - which hardware and software tools will best support your project to monitor,...
View ArticleClik here to view.
What are the Options to Batch and Store CAN Messages with the Komodo CAN...
Question from the Customer: I am using a Komodo CAN interface. Is there a way to access data from CAN messages from the batch script, not just sending messages? Also, how can I store the received CAN...
View ArticleClik here to view.
What are the Best Tools for talking to 4 MHz SPI Devices with Shorter Timing...
Question from the Customer: I am attempting to monitor my 4 MHz SPI application with 16-bit transfers with a slave device. I have been using the Aardvark I2C/SPI Host Adapter with the Control Center...
View ArticleClik here to view.
How do Beagle USB Protocol Analyzers Control the VBUS to the Target Device?
Question from the Customer: I have the Total Phase Beagle USB 480 Protocol Analyzer and am testing some bus-powered devices. Is it possible to use the Beagle Software API to disconnect and connect the...
View ArticleClik here to view.
What is the Most Streamlined, Flexible, and Low Signal Voltage Solution that...
Question from the Customer: We have the Cheetah SPI Host Adapter, and are starting to work with SPI target devices with various logic voltage levels. However, we would like emulate a slave and work at...
View ArticleClik here to view.
Which Host Adapter or Serial Platform Supports Both Master and Slave Modes...
Question from the Customer: The Aardvark I2C/SPI Host Adapter has been an excellent all-purpose tool for us; we use it for SPI, as a master and a slave. We are working on new design projects that...
View ArticleClik here to view.
Which Software Tool Should I Use with the Aardvark I2C/SPI Host Adapter to...
Question from the Customer: I have the Aardvark I2C/SPI Host Adapter and the Flash Center GUI Software which makes it really easy to use - but I do have a question. For my current lab project, I use...
View ArticleClik here to view.
How Do the Software Tools Work with the Komodo CAN Duo Interface and How Do...
Question from the Customer: I’m new to CAN and am trying to understand a certain command on my truck’s CAN bus. I’d like to record the data, break it down, and then resend it. Could the Komodo CAN...
View ArticleClik here to view.
What is the Maximum Speed We Can Achieve Between the Cheetah SPI Host Adapter...
Question from the Customer: We plan to use the Cheetah SPI Host Adapter in an automated testing application. Here are the setup details: The distance between the Cheetah and the target SPI slaves is...
View ArticleClik here to view.
Which Beagle USB Protocol Analyzer is Best to Monitor Full-Speed USB Traffic...
Question from the Customer: We are looking for a way to look at the full-speed USB traffic that will be exchanged between two embedded devices. These devices go into standby mode when they are not...
View ArticleClik here to view.
Which Host Adapter and Interface Can I Use to Create a CAN to I2C Translator?
Question from the Customer: I am working on a new design and of part of the requirement is to interface a CAN device to an I2C device. It would be really helpful to emulate that environment - do you...
View ArticleClik here to view.
See How and Why Beagle USB Protocol Analyzers are the Best Tools for...
Question from the Customer: I just got backed up with a lot of projects and I need to monitor and debug USB data sent by various USB devices. I'll be working with low and full-speed USB 2.0, about...
View ArticleClik here to view.
How Can I Configure the SPI Timing Parameters for Both SPI Master and SPI...
Question from the Customer: I have been using the Aardvark I2C/SPI Host Adapter as an SPI Master for several projects. It's worked very well for me, but I'm having some challenges with my current...
View Article