Clik here to view.
Support Question of the Week: How Do I Configure the Aardvark I2C/SPI Host...
I’m looking to set up a loopback so that data sent from an Aardvark™ I2C/ SPI Host Adapter is echoed. How can I do that? Thanks for your question! To echo data, you can set up a loopback mode by using...
View ArticleClik here to view.
Support Question of the Week: Using the Beagle I2C/SPI Protocol Analyzer, How...
Support Question of the Week: Using the Beagle I2C/SPI Protocol Analyzer, How Can I Export Captured Data from the Data Center Software to Process the Data More Easily? When viewing SPI and I2C...
View ArticleClik here to view.
Support Question of the Week: How Do I Configure Beagle Protocol Analyzers to...
I need to simultaneously monitor both the I2C bus and the SPI bus. I have one BeagleTM I2C/SPI Protocol Analyzer, as well as one Beagle USB 480 Protocol Analyzer. The setup I need: One USB analyzer...
View ArticleClik here to view.
Support Question of the Week: Using the Aardvark I2C/SPI Host Adapter, How Do...
I am using the AardvarkTM I2C/SPI Host Adapter with a PMBus (Power Management Bus) device. The protocol of the PMBus device requires a Repeated Start (Sr). The Read Byte protocol looks like this:...
View ArticleClik here to view.
Support Question of the Week: What are the Guidelines to Program SPI Flash...
This week’s article is about using a CheetahTM SPI Host Adapter for programming SPI EEPROM and flash devices, which can be done using CheetahTM GUI Software, Flash CenterTM Software, or the CheetahTM...
View ArticleClik here to view.
Support Question of the Week: What are the Guidelines to Program SPI Flash...
This article is Part 2 of an example of programming SPI Flash devices using the CheetahTM SPI Host Adapter and the Flash CenterTM Software. Part 1 provides an overview of the programming modes of the...
View ArticleClik here to view.
Support Question of the Week: How Do I Attach a Beagle USB Protocol Analyzer...
I have a question about using the Beagle™ USB 480 Protocol Analyzer. In our latest designs, many of the USB links are embedded – chips are interconnected on the same circuit board. My question: How do...
View ArticleClik here to view.
Support Question of the Week: How do I use an SPI Host Adapter to Overcome...
Q: For my application, I’d like to conduct real-time audio testing. I am using the AardvarkTM I2C/SPI Host Adapter along with the Python API to deliver SPI data in packets of 8 bytes. I am trying send...
View ArticleClik here to view.
Support Question of the Week: What Software Should We Use with the Komodo CAN...
We are working on an automotive application, and we will be using the KomodoTM CAN Duo Interface. We also have the Data CenterTM Software that was provided with the Komodo. This purpose of the...
View ArticleClik here to view.
Support Question of the Week - How can I Automatically Synchronize the Komodo...
I need to analyze and simulate a CAN-driven display system used for elevators. The display receives CAN commands and displays the floor number and other information. I don't know the bus details, such...
View ArticleClik here to view.
Support Question of the Week: What are the latest SPI Flash device support...
I have been using the AardvarkTM I2C/SPI Host Adapter and version 1.20 of the Flash CenterTM Software. For the Spansion SPI flash device, Spansion chip (S25FL256S), I have been using a Total Phase...
View ArticleClik here to view.
Support Question of the Week: When does the Aardvark I2C/SPI Host Adapter...
We are using the AardvarkTM I2C SPI Host Adapter as an I2C slave to test a master I2C port on another device. It appears the Aardvark adapter is using clock stretch while it is configured as a slave....
View ArticleClik here to view.
Support Question of the Week: How do I set up the Beagle I2C/SPI Protocol...
We have a BeagleTM I2C/SPI Protocol Analyzer and are using it with the Level Shifter Board. The target is a 1.8V I2C device and we're trying to set it up with an external power supply - not provide...
View ArticleClik here to view.
Support Question of the Week: Which Software Should I Use to Monitor MDIO...
I will be using the BeagleTM I2C/SPI Protocol Analyzer to monitor MDIO (Management Data Input/Output). Can you advise which Total Phase software tool to use to monitor MDIO? That feature does not seem...
View ArticleClik here to view.
Support Question of the Week: How do I use the API Software for the Cheetah...
We are using the CheetahTM SPI Host Adapter with an SPI slave device. This slave device sends FF bytes on MISO as long as it is busy (somewhat similar to the clock-stretch for I2C), and if it is ready...
View ArticleClik here to view.
Support Question of the Week: Using the Aardvark Host Adapter API Software,...
I am using the AardvarkTM I2C/SPI Host Adapter as an SPI master with multiple slave devices. Can you clarify how the Aardvark API Software command aa_spi_write() works? Is Slave Select asserted for...
View ArticleClik here to view.
Support Question of the Week: How do I use the Data Center Software with the...
We are using a KomodoTM CAN Duo Interface and Data CenterTM Software. We need to generate CAN Bus statistics for the following: Error Rate (either % or per/time) Packets / Time Bus Usage % (time...
View ArticleClik here to view.
Support Question of the Week: How can I use LabVIEW with the Cheetah SPI Host...
I have an SPI device that supports continuous read/write, and its format is not standard. The size of data for this device is approximate 1Mbit. Because the format is not standard, I plan to use...
View ArticleClik here to view.
Support Question of the Week: Using the Beagle USB Protocol Analyzer, How Do...
I'm working on a project where I need to continuously capture data - I'll be running the system overnight with the BeagleTM USB 480 Protocol Analyzer. My questions: How much data can the Beagle USB...
View ArticleClik here to view.
Support Question of the Week: How Do You Transfer I2C Data using an Aardvark...
Today's article is based on a new Knowledge Base article, Sending I2C Messages Between Two Aardvark adapters Using Aardvark LabVIEW The Aardvark™ I2C/SPI Host Adapter is often used with LabVIEW to...
View Article